afiqkhairi Posted August 4, 2007 Share Posted August 4, 2007 i just upgraded my laptop with the vs1gsds667d2 1gb corsair ram. but after i inserted the ram my laptop wont start is this a compatibilty problem? someone help please Link to comment Share on other sites More sharing options...
Wired Posted August 4, 2007 Share Posted August 4, 2007 Have you removed the HP memory first? Couldn't find that system in the compatibility site, but I did find the dv2310us: http://www.corsairmemory.com/configurator/system_results.aspx?id=63015 Link to comment Share on other sites More sharing options...
afiqkhairi Posted August 5, 2007 Author Share Posted August 5, 2007 initialy it had two 512mb rams i removed 1 and inserted the 1gb corsair must i remove both the hp rams? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 7, 2007 Corsair Employees Share Posted August 7, 2007 With some memory you should not mix them, I would try and install just our module and then go to BIOS setup and load setup defaults and then test the system with http://www.memtest.org. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.