Jump to content
Corsair Community

Asus P5B and 2xVS1GB667D2


Recommended Posts


I'm having problems with this config.

When only using one memory, the memtest is showing no errors.

But when I try to use two sticks, windows is getting really unstable, and memtest is showing lots of errors..

My system;


Asus P5B

Intel Core 2 Duo E6750

Fortron/Source 400W

2xCorsair VS1GB667D2

Spinpoint 500Gb


Geforce 8800GTS


Thanks in advance..

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest Bios version and then load setup/optimized defaults and set the Dim Voltage to 1.9 volts and Change ‘Write to Precharge delay’ in the BIOS (same page as for latencies) from default 10 to 15 and then test the modules again with the Voltage set to 2.0 Volts! Then test with http://www.memtest.org to be sure! But you will need to disable legacy USB in the BIOS when running http://www.memtest.org.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...