Jump to content
Corsair Community

Twin2X2048-6400 G isnt working on my MB


crippsy38

Recommended Posts

i have been using twin2X2048-6400G on my new pc. so i decided to get two more to make it 4Gig. but the memory doesnt work in the other two slots. i even switched the memory into the dual channel slots to make sure the memory wasnt bad. so i called asus and they said only certain models are compatible when all the memory slots are filled. then i called back again and another guy said to call corsair and change the timer speeds or sumthing. so which one is it and if i do need to buy another model of memory do all four have to be that model or can i keep the original two that i have mixed with the other model?
Link to comment
Share on other sites

  • Corsair Employee
Please set the memory frequency to DDR667 with 4 modules and I would set the memory Voltage to 2.0 Volts as well. The set the timings to Cas 5-5-5-15 at 12t Command Rate. You can get the exact setting definitions from the link in my signature.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...