Jump to content
Corsair Community

Dual CMX512-3200XLPro


Recommended Posts

Hello. I have two sticks of CMX512-3200XLPro. The model is XMS3208v1.1. They are both PC3200 512mb 400mhz sticks w/ 2.2.2.5

 

I am using a pentium 4 3.4ghz w/ 800 FSB Extreme Edition.

 

I have an Asus P4P800-E deluxe.

 

The memory voltage is at 2.75 volts.

 

I have run mem test on both sticks separately and together. I have been getting many errors with both sticks in all the tests.

Link to comment
Share on other sites

I am using memtest 86 and it is running all the tests. It gets errors in almost every one of the tests. The bios settings are: 2.75 volts, 2.2.2.5. latency settings. Are there any other settings that may be wrong or what other settings should i look for. I did not overclock anything in my bios either.
Link to comment
Share on other sites

  • Corsair Employees
If you are getting errors with either modules like that it would suggest some other problem, and again what are the exact BIOS settings you have set anything you changed from default?
Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest BIOS and then Load setup defaults and set these settings:

AI Over Clock Tuner: Manual

System Performance: Auto

CPU Freq: 200 MHz

Memory Frequency: 100%/DDR400

Dim Voltage to 2.75 Volts (but if you over clock 2.85 Volts)

PAM/PAT: Auto/Disabled

Resulting Frequency: 200MHz/400DDR

Legacy USB: Disabled

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 2T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 5T

Then test the modules one at a time with http://www.memtest.org and let me know if you get errors and on what test.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...