Jump to content
Corsair Community

Striker extreme & CM2X1024-6400C4 timing


wutthilr

Recommended Posts

I have a problem with mem. timing that not follow from SPD value even I apply right clock speed (800Mhz)

My MB is ASUS Striker extreme with lastest patch 1102 (3/28/07)

 

Here is captured of CPU-Z

http://img187.imageshack.us/img187/9595/corsairmemmu5.png

http://img187.imageshack.us/img187/1063/corsairspdkw2.png

 

I try to manual timing setting but not stable Window was crash (blue screen)

 

Actually, If I let the MB auto configure the timing, it will aply Command rate as 1T, so, I manual set to 2T and leave other as Auto

 

Why can not use C4 timing?

Link to comment
Share on other sites

  • Corsair Employees
According to the images they are ruinning at Cas 4 and you should load setup defaults and then set the memory Voltage to 2T and SLI Ready Memory to CPU 0% and set the Command Rate to 2T and set the TRC to 24 and then set the system.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...