Jump to content
Corsair Community

Help Please For Noob System Builder


Pierre2k

Recommended Posts

Hi Ram Guy/Anyone else that can help, I have decided recently to build myself a new Athlon 64 based system. Currently the spec is going to be: Athlon 64 3400+ 1Gb DDR400 Ram Asus K8V Deluxe 256 mb Radeon 9800XT etc etc Now I keep hearing about all these RAM compatability issues. I was planning on using Corsair Twinx 2x512MB XMS3200LL DDR memory on the ASUS K8V board and wanted to make sure it is compatible. Could you also give me any pointers with regards to setting the memory up and any settings I should impliment? Thanks for the help, Pierre2k
Link to comment
Share on other sites

  • Corsair Employees
Well for AMD64 FX you would need to use registered memory. But with this MB you would need to use non-registered or un-buffered memory like CMX512-3200LL or if you want 1.0 Gig Twinx1024-3200LL and install them in slots 1-3 and set the timings manually to the tested settings and set the Dim Voltage to 2.7 Volts and you should be good to go!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...