Jump to content
Corsair Community

4GB TWIN2X2048-6400C4 on P5N32-E SLI


LEDunk2007

Recommended Posts

Does anyone have the settings to utilize the full rated clock speed of this memory configuration on the ASUS P5N32-E SLI motherboard?

 

My current computer and the Windows XP Professional installation on it is running stable without the memory voltage induced BSOD since I flashed the BIOS with the 1103 ROM file provided courtesy of ASUS. Despite this the memory is running at 400MHz on a 4-4-4-12 timing as reported by CPU-Z. Everything on the board is stock except the revised BIOS and the manually configured voltage setting of 2 volts.

 

More specifics to come.

Link to comment
Share on other sites

  • Corsair Employees
Just load setup defaults and then set the memory Voltage to 2.1 Volts and set the timings to Cas 5-5-5-15 manually and then test the modules again with the Voltage set to 2.1 Volts! Then test with http://www.memtest.org to be sure! But set Legacy USB to Disabled when running any memory test, Also check the Command Rate it set to 2t and the TRC is set to 24.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...