Jump to content
Corsair Community

TWIN2X2048 memory timings


aneurysm

Recommended Posts

Hi, I have just put together a new system using a P5N32-E SLI PLus motherboard and a TWIN2X2048-6400 (G?) memory kit. Installed the system and everything is running fine, but the memory is currently running at:

 

CAS: 5

RAS to CAS: 5

RAS precharge 5:

TRas: 18

TRc: 22

Command Rate: 2T

 

When I bought the ram the etailer listed them as 5-5-5-12-1T, and said that was stored in the RAM spd. I can't find the option in my BIOS to get the ram timings loaded from the spd. What timings should I set for this RAM? There are advanced options in the BIOS, but I don't know what can be set there. Any help would be great!

Link to comment
Share on other sites

Just checked CPU-Z again and it claims that the spd is set with 5-5-5-18 timings.

 

Been reading about a few other people having problems with the same RAM and Asus motherboards. Is there anything I can do, I bought the ram specially because the timings were good for the price.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...