Jump to content
Corsair Community

Corsair TWIN2X2048 DDR2 675MHz 5400CL4(4-4-4-


Recommended Posts

Hi everyone, ive recently built my new rig and overclocked it, im now at the point of finishing the last few tweaks to my oc. I have very little knowledge as far as RAM is concerned so thoguht id ask here for some help.

 

I have a E4300 @ 3.04Ghz and my RAM settings are as in the Attached screenie with the voltage for the RAM set at 2v. On the offical pdf for the ram is says "tested at 675mhz 1.9v" and on pc wizzard 2007 it has "SSTL 1.8v" So what is the right setting for the RAM voltage?

 

Like i said i know very little about RAM so any help with this is much apreciated. Thanks.

854685107_Mainsettings000232.thumb.JPG.6fb9e028c390471fa7c4e60399441cf9.JPG

Link to comment
Share on other sites

  • Corsair Employees
If the system is stable at those settings I would leave it alone. But XM2S-5400C4 is tested at Cas 4-4-4-12 at 667 Mhz at 1.9 Volts, so increasing the memory voltage to 1.9-2-2 Volts would be suggested if the system is not stable.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...