Jump to content
Corsair Community

Asus Striker and Dominator PC2-10,000


bahamutduo

Recommended Posts

So far, I can't get this setup running stable:

 

QX6700

Asus Striker

Dominator PC2-10,000

 

It will post, but I get memory errors.

 

Any suggestions? I'm willing to change to another motherboard if need be, but I need to use that RAM.

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest Bios version and then load setup/optimized defaults and set the Dim Voltage to 2.4 volts and then set SLI Ready Memory to CPU Max and make sure the command Rate is set to 2T and then disable legacy USB, and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...