Jump to content
Corsair Community

Twinx2048-3200c2pt


ajl5000

Recommended Posts

Awhile back my PC began crashing to BoD. I narrowed the problem down to a stick a single stick of memory from a TWINX2048-3200C2PT pack. I ran memtest on the stick in question as well as the other 3 remaining sticks. I have always ran the memory at the recommended settings for a AMD CPU (2.5,3,3,6) @ 2.70V.

 

I think it's time to get a replacement for the bad stick of memory.

Link to comment
Share on other sites

  • Corsair Employees

Can you tell me if you set the Memory Voltage to 2.75 Volts and was the Command Rate set to 2T? Also with four modules you would need to set the memory frequency at DDR333.

If you did all these and still have only once failing, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...