Romwin Posted June 25, 2007 Share Posted June 25, 2007 I didn't think of this before I ordered the PSU and case, but I have the Antec 900 case. The PSU location is on the bottom of the case. The fan for the PSU is on the botton of the PSU. By Installing it this way there is not going to be much room for the fan to draw or push air, is this going to be a problem? Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 25, 2007 Corsair Employees Share Posted June 25, 2007 There should not be a problem, but some have mounted the PSU upside down so there is better airflow. Link to comment Share on other sites More sharing options...
Romwin Posted June 25, 2007 Author Share Posted June 25, 2007 Thanks Ram Guy, I had thought of that but wasn't sure if that would make the PSU act up. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 25, 2007 Corsair Employees Share Posted June 25, 2007 No worries it will work in any direction. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.