Jump to content
Corsair Community

xms3200c2 at 2700


jinaun

Recommended Posts

I have a 512MB 3200c2 memory, i can only run it stable at 400 at 2-3-3-7 and not 2-3-3-6 when i change to 333 and set the settings to 2-2-2-6, windows would not boot properly. it can only run windows at 2-3-3-7 at 333 pls advice i'm using abit AN7
Link to comment
Share on other sites

[quote name='RAM GUY']Can you tell me the speed of the CPU's you have and the bios settings you have set for both CPU and memory?[/QUOTE] I'm running barton 2500+ (11x166fsb) and the memory ratio is set to auto. at 166 fsb or pc2700 the memory setting is 2-3-3-7 at auto. ram voltage is 2.65v. the memory is located at 3rd slot of the nforce2 board (single slot and not pair slot) i can't manage to run the 3200c2 at 2-2-2-6 at 333, pls advice. and i also found out the command rate is 2t and not 1t ps: i've heard nforce2 board works best with tras(active to precharge) at 11 eg. 2-2-2-11, at this settings, so far windows boots ok and not yet crash. can you please confirm this tras of 11 setting [URL=http://forums.amdmb.com/showthread.php?threadid=237991&perpage=15&pagenumber=1]Check here out[/URL] pls advice
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...