Jump to content
Corsair Community

CM2x 4GB and Asus P5B Deluxe wont boot


peddapolly

Recommended Posts

Hi,

 

I recently bought 2*1 GB CM2X1024 6400 sticks so I now have 4GB

 

I´ve tried to set the sticks on all possible banks but as soon as I add the 4th stick, the monitor refuses to "start"

 

The computer starts fine without any alerts but the screens doesnt even flicker

Link to comment
Share on other sites

  • Corsair Employees
With just two modules installed please go to Bios setup and then load setup defaults and then set the memory Voltage to 2.1 Volts and set the memory Frequency at DDR677 and just let the Bios set the timings and then exit saving changes, then before it starts to Boot to the O.S. turn it off and add the other two modules and see if the system will pass http://www.memtest.org, but you need to disable legacy USB when running this program with ASUS MB's
Link to comment
Share on other sites

Think I might have discovered the issue. Took all four banks out, and tried with the two new ones only. Screen is not starting, then I tried both of them separate and with one of the new the computer and screen started correctly but not the other one. So it seems to be something wrong with one of my memory

What should i do ?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...