Jump to content
Corsair Community

getting errors in memtest


Recommended Posts

Currently using a Twin2X2048-6400 kit in my eVGA 680i board

 

I've been getting errors in WoW and an occasional BSOD lately. Using memtest, I had 2 errors when I run both sticks together in slots 0 and 2 but not in slots 1 and 3. I tested one stick in each slot for 2 or 3 passes with no probs. Then I put the second stick in slot 0 and walked off for some reason while memtest did its thing.

 

I came back to over 133K errors in test 5! I subsequently tested in every other slot and got 75K in slot 1, only 2 errors in slot 2 (strange), and over 30K in the last slot before I stopped.

 

So, ya think I have a memory problem?;):

Link to comment
Share on other sites

I've tried them in all four slots, both together and individually. I've adjusted voltages from 1.9 to 2.1 in 1/4 volt increments. I've also tried a few different timings including the 5-5-5-18 default and 5-5-5-12 suggested. It seems to be just one of the sticks.

 

I'm open to other suggestions.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...