Jump to content
Corsair Community

Gigabyte P965 DS3 and TWIN2X2048-6400


twinbad

Recommended Posts

Hello, I have a problem with my Gigabyte DS3 and Corsair TWIN2X2048-6400. Memtest detect errors (Memtest for Windows).

The revision is 5.1.

On the module, you wrote that SPD is 5-5-5-12 but SPD is 5-5-5-18.

So I put 12 and second, you indicate a 1.9V voltage so I have put +0.1V.

But always errors with Memtest for Windows.

But there is a lot of settings can you write all settings ?

Do I have a bad part ?

Link to comment
Share on other sites

I have tested :

5-5-5-18 1.8v (SPD)

5-5-5-18 1.9v

5-5-5-12 1.8v

5-5-5-12 1.9v (the most stable)

5-5-5-12 2.0v

5-5-5-15 2.0v

And always errors with Memtest, so I think I have a bad part.

I live in France. How to send you the modules ? I need to pay ?

I haven't test 667Mhz because I paid for PC6400, not PC 5300.

Will I receive 5.1 or last revision if I use RMA ? Because I would prefer have different module.

How many time it last in order to receiving modules ? I need to use my PC so can I send you modules after replacement ? (if delay exceed 7 days)

Link to comment
Share on other sites

There is Memtest errors. They occurs at 66.7% or 94.7% with Memtest for Windows. I use Memtest bootable for 6 pass and no errors but on my last PC, Windows was unstable and all other programs found errors. I changed the RAM and it run now.

 

Memtest is not the most reliable tool for memory testing.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...