Jump to content
Corsair Community

Physicall Memory Dump


Recommended Posts

I had several Blue Screens stating: Beginning dump of physical memory.

Stop: 0x00 0000 7F (0x0000000D, 0x0000000, 00x0000000, 00x00000000)

Physical Memory Dump Complete.

 

Corsair TWIN2X2048-6400 2GB Kit DDR2-800 XMS2-8400 Xtreme Performance

5-5-5-12- latency at 1.9v

MB ASUS P5W DH Deluxe/WIFI-AP-Green

Intel Core 2 Duo E6600 Conroe Processor 2.4GHz

PSU OCZ700GXSSLI 700W

Windows XP Pro

Ran memtest and had many error reports on both

 

Any info will be appreciated, I suspect bad memory.

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 2.0 Volts then set the timings manually to the tested settings for the specific module you have, and test the modules one at a time with http://www.memtest.org to be sure one is not failing. If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Ram Guy, thank you for your quick and informative reply. I had read many posts on the forums to try to troubleshoot the problem myself. I did do the steps you recommended, but the voltage was 1.9v. So I ran the tests again, per your instructions using 2.0v this time, same results, errors with memtest.

 

Please advise,

 

Thank You

Link to comment
Share on other sites

  • Corsair Employees
Let's get them or it replaced. Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it, please note that you are posting from the forum!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...