Jump to content
Corsair Community

Booting to Flash Voyager


dfiebelk

Recommended Posts

We just purchased 10 1GB Flash Voyagers for booting systems for imaging but the new Voyagers do not include the Utility for making the drive bootable and won't detect the new version of drive. Is there a utility to make them bootable or some other way?
Link to comment
Share on other sites

What O.S. are you installing on the Drive's?
The images are for windows XP but the Flash drives it would be win 98. After the computer boots to the flash drive we connect to the network and pull the image from a server. We have done it with the older 1GB Voyager but the new ones are not recognized by the voyager utility to make them bootable. Is there another utility we can use to make these bootable??
Link to comment
Share on other sites

  • Corsair Employees
If you have an older drive setup already you can use Drive Image to image the drive and put it on the new drives. Other wise use a Win98SE boot disk and set the USB drive in the Bios and a HDD and then Boot from the Win98SE Floppy and just FDISK and format the USB drive like a HDD is all you need to do.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...