Bootney Posted June 6, 2007 Share Posted June 6, 2007 Just Brought 2 GByte TwinX Matched Memory Pair Corsair CMX1024-3200C2PT for my Asus A7N8X-E Deluxe. Bios 1013 And for the life of me can NOT get it to work Any advice on the right BIOS setting please!! My Rig... A7N8X-E Deluxe Athlon XP 3200+ (400 MHZ FSB) 1GB PC3200 DDR 400Mhz CL3.0 64AOTQDXA8G16 DIMM101GBN/3200-BX 1GB 128x64, 2.6v BFG 6800GT OC 256mb AGP Plus Arctic Cooling NV Silencer FX6800 Akasa PaxPower 400W 12V 2.0 ATX ultra quiet PSU+3.3v/+5v +12v1/+12v2 -12v +5Vsb Western Digital 250Gb WD2500 IDE1 / Plextor PX-716A - IDE2 Master/Plextor PX130A IDE2 - Slave Case Antex P180B / Windows XP incl Sp2[/size] Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 6, 2007 Corsair Employees Share Posted June 6, 2007 Just install them in slots 2-3 and remove the other memory and then go to Bios setup and load setup defaults and then set the memory Voltage to 2.7 Volts and set these settings: CPU Freq: 200 MHz System Performance: User Define Memory Frequency: 100% Dim Voltage to 2.7 Volts Resulting Frequency: 200MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 3T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 8T Then test the system with http://www.memtest.org. Link to comment Share on other sites More sharing options...
Bootney Posted June 6, 2007 Author Share Posted June 6, 2007 The Manual refers to the slots as DIMM A1, DIMM A2 and DIMM B1 Which is Slot 2 and Slot 3????? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 6, 2007 Corsair Employees Share Posted June 6, 2007 Slot one is closest to the CPU 1-2-3! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.