Jump to content
Corsair Community

TWINX1024-3200C2PRO Problems


Recommended Posts

Hello, first off, I'd like to thank The RamGuy and the Corsair team. I've been reading through other topics here and have been trying to do everything that you've been telling other people. None have seemed to work yet, so I'm assuming its the rams problem.

 

Specs:

MOBO: ASUS P4P800 SE

RAM: Corsair TWINX1024-3200C2PRO 1GB Kit DDR400 XMS3200 Dual-Channel ProSeries Memory w/Heat Spreader

CPU: Intel P4 3.0ghz HT

VIDEO: BFG 6800Ultra

HD: 80g WD

 

I've actually had the ram for about a year (bought through ZipZoomFly), but didn't really think about why my problems were occurring. Every once in awhile Windows would just randomly reboot, not under load or anything. It would usually do it once every 1-2 months, so I never really thought about it, and it didn't really effect me too much. I started to notice the problems when I would try and play games. They would crash while loading things, with a memory error. It is odd, that some games work fine but others don't.

 

Anyways, too the memtest86 pictures...

IT IS NEEDED TO KNOW THAT I STOPPED THE TESTS AT TEST 5, There may be more errors after the 5th test, I don't know...

First two on default settings

http://img.photobucket.com/albums/v476/PS4U/060207_21191.jpg

http://img.photobucket.com/albums/v476/PS4U/060207_21192.jpg

Here I ran it again with the ram set at v2.75 MANUALY

http://img.photobucket.com/albums/v476/PS4U/060207_22241.jpg

Thanks for your help!

 

PS:Is there any way to have them ship replacement ram then I send mine? I would really like to keep this computer running without downtime.

Link to comment
Share on other sites

  • Corsair Employees
Please makes sure that you have the latest BIOS and load setup defaults and then set the Dim Voltage to 2.75 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...