Jump to content
Corsair Community

Need RMA Approval


Recommended Posts

System Blue screened on me so I started trouble shooting. With this as the only Module the system reboots in a loop. I ran Memtest on both Modules and this 1 tests bad. This was part of a 2 gig kit and with the same settings this module fails. The other module is working as a single.
Link to comment
Share on other sites

Antec TruePower 2.0 TP2-550 EPS12V ATX12V 550W Power Supply

MSI K8N Neo4 Platinum Socket 939 NVIDIA nForce4 Ultra ATX AMD Motherboard

AMD Athlon 64 X2 4200+ Manchester 2.2GHz Socket 939 Processor

CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM DDR 400 (PC 3200) Dual Channel Kit Desktop Memory Model TWINX2048-3200C2PT

 

The system was built in Feb of 2006 and had a memtest run on it when it was built, it passed. It ran fine until 3 days ago when I noticed a start up program errored but did not do it again. Then today it BSOD'ed and went in to a reboot loop. After finding out the system booted with the bad module removed I ran a Memtest on it again and it failed miserably while the other module passed. I have no custom settings. The memory settings in bios are set to auto.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...