Cdshot10 Posted May 22, 2007 Share Posted May 22, 2007 I currently have TWIN2X1024A-6400 installed and have ordered TWIN2X2048-6400C4*¹. How will this work with my current ram and should I adjust timing, voltages etc? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 22, 2007 Corsair Employees Share Posted May 22, 2007 Just make sure you have the latest Bios and then load setup defaults and set the memory Voltage to 2.0 Volts and set the memory frequency manually to DDR667 and let the Bios set the timings but make sure Command Rate if it's listed is set to 2T. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.