Jump to content
Corsair Community

ValueSelect & MSI K8N Neo4 Platinum


action_man

Recommended Posts

I got my memory from here:

 

http://www.newegg.com/Product/Product.asp?Item=N82E16820145579

 

And when I got the memory, it crashed my computer within a few hours. Ever since then, it's been crashing my computer in lower time increments, usually between 2-10 minutes.

 

The most stable voltage was 2.55 volts, but even that still crashed my computer.

 

Any help would be greatly appreciated. Thanks.

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.75 volts and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...