donjuan143 Posted May 16, 2007 Share Posted May 16, 2007 i just finished assembling my new pc, however i always get this msg "your system last boot failed or post interrupted, please enter setup to load default and reboot again''. i don't know what to do? Is it from the memory? everything is at default. Asus Striker Extreme Corsair Dominator Twin2X2048-6400C4D INTEL CORE2 EXTREME XFX NIVIDIA 8800GTX RAPTOR X 150GB GALAXY 850W Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 16, 2007 Corsair Employees Share Posted May 16, 2007 Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.1 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.