Jump to content
Corsair Community

CM2X1024-6400C4: Similar problem as thread 59290


guod2

Recommended Posts

Reference: http://www.houseofhelp.com/forums/showthread.php?t=59290

 

Asus P5N32-E SLI Plus

Running the latest bios: v0602 (cleared CMOS)

Intel E6700

2 x 1 GB... 2GB CM2X1024-6400C4 (and trying to add 2 x 1 GB more)

 

Same deal. Runs 2GB fine. I try and add 2 more sticks of exact same ram and I get: "load needed DLLs for kernal. Please contact your support person to report htis problem" the first time then on reboot after the first post screen it goes blank. Take the 2 sticks back out and Windows comes up fine.

 

I've tried swapping between the 4 sticks. Any 2 work fine.

Link to comment
Share on other sites

  • Corsair Employees

I would try and set these settings manually with just Two modules installed and then see if it will post with all 4 installed.

What is the make and model of your PSU and what Video card or cards are you using?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...