franklin84 Posted May 1, 2007 Share Posted May 1, 2007 Hello! I've got an Asus A7N8X-E Deluxe Mainboard with the latest Bios version (1013). My CPU is a AMD Athlon XP-M 2800+ running at 11x182 MHz FSB :cool: I tried to install 2 Corsair CMX1024-3200Pro but it won't work! Everytime I get Blue Screens at the end of boot process or on Windows desktop. Can someone tell me optimal Bios-settings for these memory sticks?? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 1, 2007 Corsair Employees Share Posted May 1, 2007 Please install the modules in slots 2-3 and then go to Bios setup and load setup defaults and set these settings. CPU Freq: 166 MHz System Performance: User Define Memory Frequency: 100% Dim Voltage to 2.7 Volts Resulting Frequency: 166MHz Memory Timings: Manual/User Define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 7T SDRAM Active to Precharge Delay (tRAS): 7T Then if you over clock the closer you get to DDR400 you will need to relax the timings to Cas 3 and I would set the memory voltage to 2.8 Volts and lower the CPU miltiplier if your CPU is unlocked. Link to comment Share on other sites More sharing options...
franklin84 Posted May 2, 2007 Author Share Posted May 2, 2007 Thx for this fast reply! I'll try this out! My CPU is unlocked. Normally the multiplicator is 14, if I overclock I use 11. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 3, 2007 Corsair Employees Share Posted May 3, 2007 NP Please do let me know. Link to comment Share on other sites More sharing options...
franklin84 Posted May 3, 2007 Author Share Posted May 3, 2007 Ok, I killed my Hard Disk Drive with this RAM!!! It don't work! But every Time I get a BSOD. Then I tested with Memtest under DOS, all OK... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 4, 2007 Corsair Employees Share Posted May 4, 2007 Its hard to say, with out more information, but if you don't get errors in memtest it may just be a coincidence. Link to comment Share on other sites More sharing options...
franklin84 Posted May 22, 2007 Author Share Posted May 22, 2007 Hello! I think one RAM is damaged! What can I do, because i have no invoice. I bought these two RAMs from eBay. Please help me! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 22, 2007 Corsair Employees Share Posted May 22, 2007 You would need to contact the reseller sorry there is no warranty if you purchased them from another user. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.