Jump to content
Corsair Community

Think I have a Bad module in pair


Recommended Posts

Corsair TwinX2048-3200C2pt


Purchased 2X 1GB paired RAM modules from newegg.

Both modules ran fine for ~2 weeks, then Blue screen of death. Memtest86+ showed errors for one of the modules. Took out flagged module, (only good stick in MB slot1) ran Memtest86+ - no errors on remaining module. Took out good stick and put in flagged stick, (only the flagged stick was in MB slot1) - lots of errors.


Note - no overclocking, or mods. No additional RAM, other than these 2 modules. Computer has been running fine for over 2 weeks, with only the good stick in.


Bad module info - CMX1024-3200C2PT XMS3202v3.1.


Where do I go from here?


If this is indeed a bad module; since they are a matched pair, would I return both as a set, or only the single bad module?


Thanks for your help.



Link to comment
Share on other sites

  • 4 weeks later...

Dear Ram Guy,


It looks like Corsair received my RMA shipment over 2 weeks ago, but I have heard nothing from Corsair :confused: Would you please let me know how to find the status of my RMA#1005597?




Here is the tracking info for the RMA package I sent to them.

Tracking Number: 1Z E7E 349 03 5319 316 9


Type: Package

Status: Delivered

Delivered on: 05/10/2007

10:11 A.M.

Delivered to: FREMONT, CA, US

Signed by: AQUINO

Service Type: GROUND

Link to comment
Share on other sites

  • Corsair Employees
I am sorry we can no longer check RMA status in Tech Support; please call our customer service at 888-222-4346 or 510-657-8747 Ext “0” or send them an email (rma@corsairmemory.com) with your RMA# and ask them for the status!
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...