wowowox Posted April 27, 2007 Share Posted April 27, 2007 Hi, Recently one of my VS512MB400 broke. What should I do? I will see blue screen from the windows anytime. I have tried on many computers and all happen to be the same. What should I do to replace it under warranty? However, the other identical RAM seems to be fine. PS. although only one of them is broken, i do need 2 identical ones to run under dual channel. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 27, 2007 Corsair Employees Share Posted April 27, 2007 Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.7x volts and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.