sirichmond Posted April 24, 2007 Share Posted April 24, 2007 Hello, Just got a 2GB kit matched pair of Corsair XMS 3500PROLL for my 939 system. Now there is a slight problem and I am baffled. They wont run in dual channel mode machine wont even post and in single channel mode they boot occasionally. I have tested each stick separately and they work fine will boot into windows and run memtest no problems but together they have issues. I have tried them in my rig and a friends with different mobo and same problem occurs. I set the timings and correct voltage in the bios. Any advice would be grateful. Cheers Simon Link to comment Share on other sites More sharing options...
Legend Posted April 27, 2007 Share Posted April 27, 2007 Install in the orange slots. Try posting with one modules and adjust the DDR Voltage to 2.8v. Link to comment Share on other sites More sharing options...
sirichmond Posted April 27, 2007 Author Share Posted April 27, 2007 I have tried the mem in all of the slots and had voltage set at 2.8volts. Still no joy. Link to comment Share on other sites More sharing options...
Legend Posted April 27, 2007 Share Posted April 27, 2007 Test the modules one at a time with http://www.memtest.org Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 30, 2007 Corsair Employees Share Posted April 30, 2007 What you have posted would suggest some other problem, can you test them in another system? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.