Jump to content
Corsair Community

CMX1024 -3200C2 gone bad


stevo.k

Recommended Posts

My XP system started rebooting repeatedly and not loading XP. Removed one stick at a time to troubleshoot, first tried stick 'A' - still reboot loop, swapped to stick 'B' - runs fine on 1Gb. Suspect bad module 'A'.

Please advise for replacement.

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.75 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...