Jump to content
Corsair Community

No Dual-Channel Post with Corsair TWIN2X2048-6400C4 & ASUS M2N32-SLI Deluxe (Wireless


Recommended Posts

I have an ASUS M2N32-SLI Deluxe (Wireless Edition) motherboard and 2 1GB sticks of Corsair CM2X1024A-6400C4 that are set to operate at 800MHz at the low latencies of 4-4-4-12. My CPU is the AMD Athlon 64 X2 Dual-Core AM2 3800+ (65w).


If I have my Corsair TWIN2X2048-6400C4 in the recommended Dual-Channel DIMM slots (DIMM_A1 & DIMM_B1 - the yellow slots), my system will not post. The only way I can get my system to post is if I put the memory in DIMM_B1 & DIMM_B2 (Single-Channel). For some reason I can't get the system to boot using Dual-Channel.


I thought it might be a problem with my memory, so I bought another pair (exact same model). The 2nd pair had the very same problem. I even replaced my motherboard, video card, power supply, and processor, but I still have the same problem


I played around with the settings in the BIOS and set it to some of the recommendations I have found in this forum, but I still can't get it to post using Dual-Channel.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...