Jump to content
Corsair Community

Bad VS512MB400 module in a pair


Recommended Posts

I have a 2GB system with 2 pairs of VS512MB400 Corsair modules, lot:0432025-0. Started lately to get random crashes, especially when in 3D mode.

Tested the RAM with MEMTest86+ 1.70 and found a faulty module that gives errors at 9.3MB; adresses: 9841a8, 50d8, 5978, 5b08 and many more.


I guess I will simply need an RMA on this one.



Link to comment
Share on other sites

  • Corsair Employees
Please load setup defaults and then set the Dim Voltage to 2.75 volts (+.2 Volts W/Giga-Byte) and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...