mingyar Posted April 13, 2007 Share Posted April 13, 2007 hi i have a corsair xms3700v1.1 512Mb module and i have some problems with my system, so i run testmem to check my memory and i have found that in test #1 2 errors test#3 4 errors test#4 92 errors i have my sistem all set on default, not overclocked,can i have a RMA number? thanx Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 13, 2007 Corsair Employees Share Posted April 13, 2007 You would need to set the memory voltage and timingas manually for these modules. Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually Cass 3-3-3-8 and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.