Nazari Posted April 9, 2007 Share Posted April 9, 2007 I am fairly new to the whole RAM compatibility thing. I had a bit of help building my new system, but it appears I am having memory issues. My computer has been locking up at POST, and I get a "Memory T" as the last line, or it will say my memory and then just freeze there. I "fixed" it once by removing one of the 4 sticks of memory after testing them seperately, and it booted up again, but now a week later I am having a similiar issue. Intel Core2 CPU 6400 @ 2.13GHz(266x8) Gigabyte GA-965P-S3 TWIN2X1024-5400C4 (4 sticks, 2GB RAM) NVidia GForce 7900 GS I am not sure what other information is valuable here, but thank you for the time. Link to comment Share on other sites More sharing options...
Nazari Posted April 9, 2007 Author Share Posted April 9, 2007 Also, the RAM is still able to be returned to the retailer, I was looking at the MOBO/RAM compatibility finder, and I don't see my exact MOBO listed, as I may just buy new RAM if I find it not to be compatible, which listing would be closest to my setup? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 10, 2007 Corsair Employees Share Posted April 10, 2007 Please make sure you have adjusted the Memroy Voltage to +0.2v. Link to comment Share on other sites More sharing options...
Nazari Posted April 10, 2007 Author Share Posted April 10, 2007 I tried doing that, it appears that I have a bad pair of memory. After testing the sticks, removing the pair in the second slot made it run fine. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 11, 2007 Corsair Employees Share Posted April 11, 2007 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them or it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.