The Puma Posted April 8, 2007 Share Posted April 8, 2007 Hallo, I have four CM2X1024-8500C5 When i use only two off them then can i clock the memory with 1000Mhz When i use all of them ( 4 parts ) then get memory errors and no go which vista When i clock on 800Mhz then the errors are gone Why can i clock this 4 modules not which 1000mhz? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 10, 2007 Corsair Employees Share Posted April 10, 2007 The motherboard may be linited to 800MHZ with 4 modules installed. Link to comment Share on other sites More sharing options...
The Puma Posted April 11, 2007 Author Share Posted April 11, 2007 I can do with 1000Mhz but i get memory errors (memtest) and unstable system Can i do with 4 memory modules more VDIMM voltage than the 2.2v?? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 11, 2007 Corsair Employees Share Posted April 11, 2007 Over 2.2 Volts will Void the memory warranty and this is not the memory that is doing that, so I would try and add more voltage to the Chipset. Link to comment Share on other sites More sharing options...
The Puma Posted April 11, 2007 Author Share Posted April 11, 2007 I buy two kit of this memory and i can not do more than 800Mhz :sigh!: :[pouts: Then i have could buy cheaper memory then Corsair. This is very disapointent Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 11, 2007 Corsair Employees Share Posted April 11, 2007 This is not a memory limitation, and it will not matter who's memory you use it is a chipset limitation. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.