The Puma Posted April 7, 2007 Share Posted April 7, 2007 Hallo, I have 2 modules and used it in a Gigabyte GA-965P-DQ6 Rev 3.3 with no problems at 1000Mhz Then is upgrade and buy another kit off above memory Then the problems begin. The Old one in use in the yellow slots and the new parts in the red slots. With 1000Mhz i get a lot of memory error in memtest+ If i test the new memory modules alone there a no errors and i can work at 1000Mhz What are the problem, and how can i solve the problem? Must i set the CDIM voltage higher??? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 10, 2007 Corsair Employees Share Posted April 10, 2007 Do you have 2 or 4 modules? Are the version numbers the same? Link to comment Share on other sites More sharing options...
The Puma Posted April 11, 2007 Author Share Posted April 11, 2007 I have 4 parts, and yes version number is the same (1.3) Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 11, 2007 Corsair Employees Share Posted April 11, 2007 With 4 modules you would need to run the memory frequency at DDR667! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.