Jump to content
Corsair Community

P5ND2-SLI Deluxe & Twin2x2048-5400C4


Recommended Posts



I need help now !!

I have been working with this fault in 6 month, and is now out of ideas.


I have made a gaming PC, but has not been able to get it to run correctly.

It is slow, and it can freeze then pushed.


I have memory problems.

I easy get over 5.000.000 Pagefaults,

and I might have a memory leak, or something.



I read that Pagefaults is generated, then the system is out of memory, and uses Swapfile.

I then went from 2GB to 4GB of Ram.


The ram was using the 5-5-5-15-2T

The pdf of the ram, says 4-4-4-12-2T

I have tried both manual setup.


Testing the ram with the mem86 test from microsoft.

No problems


I read, that it could be slow access to the swapfile.

So I went from 1 HD (Striping) to 2 HD(striping) , and placed the swapfile, on the other drive than XP.


Installed watercolling on the CPU, Chipset and GPU.

The temp is now more stable, but the system is still slow.


It programs with the highest Pagefault, is Battlefield 2, Internet Explorer, Norman. All programs using/about the internet.

There has been some problems with the Nforce "firewall"

I reinstalled XP, without the Nforce firewall.

Moved the network to the Intel NIC, and disabled the Nvidia NIC.


Not then Vista have been launched,

I removed the sata/raid drives from the PC.

Then I have removed the raid controller,

and any driver problems with XP.

Installed Vista on an PCI HD.


I still get the many pagefaults ............



Now I am out of memory, and need help.


Is the a problem with this MOBO, and the type of RAM

Is there other setting I can try ?


That can I do to test furture ??



My system now:

Asus P5ND2-SLI Deluxe

Bios 1104


Intel D 830 3,0 Ghz


Twin 2x2048-5400C4

Twin 2x2048-5400C4


SLI mode:

Asus - Nvidia GeForce 6800GT

Asus - Nvidia GeForce 6800GT


Stribe 1:

Hitachi 300G

Hitachi 300G


Stribe 2:

Maxtor 250G

Maxtor 250G


Purepower 680W



Link to comment
Share on other sites

  • 4 weeks later...


This topic is now archived and is closed to further replies.

  • Create New...