Jump to content
Corsair Community

RMA request for CM2X1024-6400C4 (Kit 1GB X 2)


walleye

Recommended Posts

Hello RamGuy:

Here is RMA request for my case.

Motherboard: Asus P4WDH Deluxe,Bios 1901

Memory: CM2X1024-6400C4 (1GB X 2)

CPU: Intel Core2Duo E6600

Video: ATI Raedon X1300Pro 256MB

Floppy: Sony

 

*Motherboard would not POST or freezes, CMOS Checksum Error, only recognized 265 MB of memory--very frustrated!

*Borrow a different pair of memory (different brand) from a friend and swap them in. Motherboard POST normally.

*Memory module purchased at Zipzoomfly.com in 2-19-07

*Looks like many people have problems with CM2x1024-6400C4. Poor quality control???

Please authorize an RMA. I need to build and get the comp working. Thank you very much!

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and then load setup defaults and set the memory voltage to 2.0 Volts and exit saving changes and then install the modules, they have a minimum voltage of 1.9 Volts and that may be why you had this problem.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...