Jump to content
Corsair Community

CORSAIR 2GB DDR2 PC6400 XMS2 XTREME Problems


Hellgore

Recommended Posts

Hi,

 

I bought this part 2 months ago and before that my totally new PC was fully stable.

I installed he new part and well my Pc got unstable showing me several blue screens some related to my RAM and some related to other stuff.. but mostly my PC would only shut down after 1-5 hours of playing WoW or just beeing online chating or downloading.

 

I think the part might be faulty and wanted to ask what i can do about it.

Im located in sweden and therefore it might be of help to know whom i should contact.

Link to comment
Share on other sites

  • Corsair Employees
With just our modules installed, please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.1 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...