Jump to content
Corsair Community

Bad module XMS3200 512mb


d4lwolf

Recommended Posts

XMS3200 512mb 400mhz (CMX512-3200xlpt)

 

Hi i have a matched pair of the above, i noticed over the past few weeks my system getting unstable. i ran mem test 1st on both modules then on individual modules in the same slot, i have identified the one bad unit.

 

system settings at default on Asus P4C800-E Deluxe

where do i go from here?

 

thanks

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.75 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...