Jump to content
Corsair Community

UPC for Rebate


Recommended Posts

Hi, I cut my UPC off my paper insert that came with my corsair ram from newegg.com. I was reading that I cannot return it to newegg now. Is that correct? I can still send it to Corsair though right? What information do I send with the ram? I did a RMA request and I'm sure that it tells me what to send? I just hope I don't need the UPC for the RMA. That would be dumb though and I'm sure I have everything. This sucks to get 2 sticks of bad ram. Hope I get these parts back fast because I have a 1 month old computer collecting dust!
Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest bios and load setup defaults then change ‘Write to Precharge delay’ in the BIOS (same page as for latencies) from default 10 to 15 and then test the modules again with the Voltage set to 2.1 Volts and the tested settings set manually! Then test with http://www.memtest.org to be sure! But it would be close to impossible that you had two failing modules from us.

And the UPC code is not needed with our RMA!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...