Jump to content
Corsair Community

Memory timings for 2 pairs of TWIN2X2048-6400C4D


dguarnaccia

Recommended Posts

After reading and searching for a few hours, I figured I'd better post this question. I've put together a new system with the following:

 

MSI P965 Platinum

QX6700

2 pairs of TWIN2X2048-6400C4D

MSI 8800GTX

4 WD Caviar SE16's in a raid5 config

Corsair 620HX PSU

 

Now, I'm unable to get both pairs of DIMM's to run at 4-4-4-12. I can get them to run individually, and I've run memtest on each pair at 4-4-4-12 for about an hour each with no errors, but when I put both pairs in the system, it won't boot at 4-4-4-12. It will boot at SPD settings (5-5-5-18 I think). *Edit - All these test were running at 2.1V.*

 

So my question is, is there something I'm missing to make this work or will I be unable to reach this timings with 2 pairs of DIMMs?

 

Any advice/Feedback appreciated.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...