Jump to content
Corsair Community

Bad CM2X1024-6400 Modules


Recommended Posts

  • Corsair Employees
With the MB you have listed please Change ‘Write to Precharge delay’ in the BIOS (same page as for latencies) from default 10 to 15 and then test the modules again with the Voltage set to 2.o Volts and the tested settings set manually! Then test with http://www.memtest.org one module at a time to be sure! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...