Jump to content
Corsair Community

Bad Module TwinX1024-3200C2PT


Jaimie

Recommended Posts

Hello,

 

I've been receiving BSODs in Windows XP reporting a Physical_Memory_Dump. I ran my modules through MemTest and discovered that one of my 512MB modules generated constant errors at 319.4MB. The other stick still works. I've been running the memory at factory settings on a DFI LanParty 250Gb motherboard.

 

I would like to request an RMA. If you need more information, I can provide that.

 

Thank You,

Jaimie

Link to comment
Share on other sites

  • Corsair Employees
Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...