Jump to content
Corsair Community

Gigabyte Compatibility !


NoSkill

Recommended Posts

  • Corsair Employees

Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.

 

Please note you may have to reset the bios to get it to post when you make hardware changes.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...