Jump to content
Corsair Community

Adding a Twin2x2048 -6400

Scott C

Recommended Posts

I currently have only a Twin2x1024A-6400 set installed in my Asus P5WD2 Premium motherboard, with the recommended bios settings:


Motherboard make and model: Asus P5WD2 Premium/Deluxe

Each pair is tested and packaged together using the following settings:

AI Over Clock Tuner: Manual

CPU External Frequency: Manually set to 200MHz

DDR2 SDRAM Clock: Manually set to 800MHz

PCI Express Freq: Auto

PCI Freq: 33.33

Performance Mode: Standard

DRAM Timing Selectable: Manual

SDRAM CAS Latency: 5T

SDRAM RAS to CAS Delay (tRCD): 5T

SDRAM Row Precharge (tRP): 5T

SDRAM Active to Precharge Delay (tRAS): 15T

SDRAM Write Recovery Time: 5

Write to Precharge Delay: 15 (If it's Listed)

Command Rate: 2T

DDR2 SDRAM Voltage: 1.9

Chipset Core Voltage: Auto

All other settings are motherboard defaults.

Maximum DDR2 recommended VDIMM: 2.1 Volts


Now I want to add a Twin2x2048-6400 set in the two remaining slots for a total of 3 GB.

1) would there be any incompatibility issues?

2) Will I need to change the above settings in any way?




Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...