Jump to content
Corsair Community

EVGAnForce680iSLI and 2xCorsairTWIN2X2048-6400C4 Problems


micki70

Recommended Posts

I have 2 pairs of CorsairTWIN2X2048-6400C4 all the same Revision in my mobo. CPU-Z and Everest say the following:

 

http://img180.imageshack.us/img180/4962/slot13pm6.jpg

 

slot 3 is different than all the others.

I put 1 pair into slot 1+3 and the other pair into 2+4.

Inspite I bought modules with EPP the one in slot 3 is a non EPP and non CL4.

I set the timings to the recommended 4-4-4-12 at 800 MHZ with 2.1 Volt manually in the bios. They are all running with this without any errors but the bios says that there were no EPP modules inserted.

 

I decided to buy these CORSAIR because they were meant to be certified for this mainboard. :(:

 

Please help me :confused:

Link to comment
Share on other sites

The SPD on your sticks looks like it is different between the two. You can flash the SPD from one stick to the other, but this can cause problems. Your other bet is to RMA them for ones that are working.

 

Both of these seem to be overkill as everything is already working there is no reason to change this.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...