Jump to content
Corsair Community

Striker Extreme + TWIN2X2048-8500C5


Recommended Posts

Here are the specs:


Module Part Number: TWIN2X2048-8500C5

Motherboard: Asus Striker Extreme

BIOS version: 0901

CPU: Intel Core 2 Duo E6600, 2.40 GHz

Power Supply: SilverStone SST-ST60F-GM 600W ATX PFC

Video Card: Asus EN8800GTX/HTDP/768M PCI-E


And here is the issue:


Two 1Gb RAM-sticks, A and B. If I use only A everything works fine. If I use only B startup gets stuck at "PCI INIT" (shows on little LED screen on back of comp), can't get into BIOS. If I use both A and B startup gets stuck at DET DRAM, can't get into BIOS. Bought them a couple of weeks ago, worked fine up until now, then sudden restart and this.


What should I do?

Link to comment
Share on other sites

Memory timing set to 5-5-5-15 T2 and legacy USB disabled. Ran test through once with ram stick A, no errors (will leave it on to run a couple of more runs once I've written this). Tried booting with ram stick B (using the same slot as previously used by A), but still stuck at "PCI INIT" (screen won't even turn on).
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...