Jump to content
Corsair Community

SLI-Ready Will not work.


Checkyoursix

Recommended Posts

Ram guy im having alot of issues with my evga 680i Mobo getting the timings setup the motherboard basically needs cmos cleared everytime i enable SLI-Ready I have yet to get the memory up to 1066 mhz and can never get the timings to set correctly at anything other than 800 and SLI-Ready disabled any ideas?
Link to comment
Share on other sites

RamGuy: Yes i have every scenario of ram module setups is identical either stick in every slot and both sticks in blues/blacks Its all the same. Memtest fails at 40% in every setup I am RMAing the motherboard on tuesday to EVGA. MY PSU is: ENERMAX GALAXY EGA1000EWL-DXX ATX / BTX 1000W Gamers Edition

 

Yoxxy: Yes I have changed the voltage to the corsair specified 2.2v. Also I tryed a few setups with 2.1v because i heard some people saying it helped them. This didnt effect anything at all.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...