Jump to content
Corsair Community

twinx1024c2pt wont post at 400


jdkinmich

Recommended Posts

Have Award Phoenix v2.1 bios, the only setting windows will boot on is auto. When I try to set manualy to corsair specs windows wont run. When bios sets it it clocks at 333. Do i need a different bios version or am i just doing somthing wrong.

 

More likely, it's due to the limitations of your particular stepping of your particular CPU. You have a Socket 754 CPU and motherboard, and you may have a very early stepping of your CPU, which will drop the memory speed to DDR333 with more than one single stick of memory installed and won't run properly with the memory manually set at DDR400.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...